appspicks

Polycam vs Scaniverse: free tiers, exports, splats and Android

Scaniverse is the cheaper way to make free scans and Gaussian splats. Polycam costs more but unlocks OBJ, STL, floor plans and point clouds for real work.

· Editor · · 8 min read

Key takeaways

  • Scaniverse is the better free choice for scans and Gaussian splats, while Polycam is worth paying for when you need OBJ, STL, floor plans or point clouds.
  • Hobbyists and splat makers should start with Scaniverse; real estate, architecture and 3D printing users are better served by Polycam's paid plans.
  • As of November 2026, Polycam Basic costs $30 a month or $150 a year, and floor plans and point clouds need Business at $400 per user per year.
  • Neither app is built for whole buildings, and Android phones lack LiDAR, so test a free scan on your own phone before you subscribe.

For most people weighing Polycam vs Scaniverse, Scaniverse is the better place to start if you want free scans and Gaussian splats, while Polycam is the one to pay for when you need OBJ or STL files, floor plans or point clouds. Both run on iPhone and Android, and both use LiDAR on Pro iPhones. Prices and plan details here are as of November 2026, and both lineups changed this year, so check before you subscribe.

Quick verdict

  • Pick Scaniverse if you are a hobbyist, want splats of places and objects, and do not want a subscription for basic scanning.
  • Pick Polycam if you need files for 3D printing, CAD or game engines, or measured floor plans for clients.
  • Try both if you are not sure. Each has a free tier, and a short test on your own phone tells you more than any spec sheet.

One honest limit: we have not published side-by-side test scans yet. The object, room and outdoor sections below describe what each app is built to do, based on its plans and documented features.

Polycam vs Scaniverse at a glance

PolycamScaniverse
OwnerPolycamNiantic Spatial
Free tierLimited captures, GLTF export only, public linksFree on-device Classic mode; credit cap reported
Paid plansBasic $30/month or $150/year; Business $400/user/year; Enterprise $1,200/seat/yearPlus $20/month; Pro $50/month; custom Enterprise
PlatformsiOS, Android, web, Apple Vision ProiOS, Android, web
LiDAR captureYes, on Pro iPhones and iPad ProYes, on Pro iPhones and iPad Pro
Gaussian splatsYes (unlimited on Basic and up)Yes, processed on device
Splat formatPLY, with Unity and Unreal workflowsSPZ (compressed) and PLY
Floor plansBusiness and EnterpriseNot a focus
360 camera inputNoYes, on paid cloud tiers

Polycam prices were checked on its pricing page in October 2026. Scaniverse's paid tiers come from a July 2026 comparison by SkyeBrowse, a drone-software vendor, and have not been confirmed on Niantic Spatial's own site.

Free tier limits

The free tiers are where these two apps differ most. Scaniverse built its name on free, on-device scanning, while Polycam's free plan is closer to a trial.

Polycam Free

  • A limited number of space, object and AI captures.
  • Exports in GLTF only. OBJ, FBX, STL, point clouds and floor plans need a paid plan.
  • Images and video can be exported, but with a watermark.
  • Sharing is through public links only, so private client work is out.

GLTF is fine for viewing a model on the web or dropping it into some 3D tools. It is not what most slicers or CAD programs expect, so the free plan does not really cover 3D printing.

Scaniverse free

Scaniverse's Classic mode processes scans on the phone and has been free without a subscription. The July comparison described free on-device splats as unlimited. A later SkyeBrowse roundup says the free plan includes mobile capture, metric scale and exports, but with 20,000 monthly credits.

Those two claims do not fit neatly together. Our reading is that on-device work stays free while cloud processing eats credits, but confirm this in the app before you plan a big project around it.

Polycam dropped its Pro plan in 2026. Older reviews quote Pro at $26.99 a month or $199.99 a year through the App Store, and those figures are now out of date. The current lineup looks like this:

  • Basic, $30/month or $150/year: unlimited object captures and splats, unlimited space captures with or without LiDAR, mesh exports (Polycam's summary says six formats) and private links.
  • Business, $400 per user per year: adds 2D and 3D floor plans, advanced measuring tools, a shared team library, point cloud exports and virtual walkthroughs.
  • Enterprise, $1,200 per seat per year: a three-user minimum, aimed at larger teams.

Basic and Business annual plans come with a 7-day free trial. It rolls into a full annual subscription unless you cancel, so set a reminder.

Scaniverse, now owned by Niantic Spatial, added Plus at $20 a month and Pro at $50 a month, plus custom Enterprise pricing. The paid tiers add credit-based cloud processing, including splats from 360-degree cameras, and commercial usage rights. The changes followed Niantic Spatial's relaunch of Scaniverse alongside VPS 2.0 around April 2026, which GeekWire covered at the time.

Export formats

If you already know which file your next tool needs, this section probably decides it for you.

Export typePolycamScaniverse
GLTFFreeAvailable
Meshes (OBJ, FBX, STL and others)Basic and upIncluded in free exports per recent sources
Point clouds (LAS, PLY, PTS, XYZ, DXF)Business and EnterpriseAvailable
Geo-referenced LASBusiness and EnterpriseNot documented
SplatsPLYSPZ and PLY

Polycam's mesh exports cover the usual 3D printing and modelling formats once you pay for Basic. Point clouds, which surveyors and architects tend to want, sit behind Business. That makes Polycam the costlier route if you need LAS or XYZ files.

Scaniverse has long let free users export meshes and point clouds, and recent descriptions of its free plan still list exports. What changed after the relaunch at the format level is not fully documented, so treat the Scaniverse column as likely rather than certain.

Gaussian splats

Gaussian splats are a newer way to capture a scene as millions of soft, colored points. They look far more photographic than a mesh, especially for reflections, foliage and fine detail, but they are not solid geometry you can 3D print.

Processing and file size

Scaniverse's big draw is on-device splat processing in Classic mode. Your scan never has to leave the phone, and you do not wait in a cloud queue. It also exports splats in its own SPZ format, which is compressed to make files much smaller for sharing.

Polycam makes splats too, unlimited on Basic and above. It leans on cloud processing for photo-based captures, which takes the load off your phone but means uploading your data.

Game engines and sharing

Polycam's splat tools are geared toward Unity and Unreal Engine workflows through plugins. If you build scenes for games, virtual production or visualisation, that is a practical advantage.

Scaniverse is stronger for quick sharing. Smaller SPZ files travel easily, and the app promotes a public map of splats contributed by users. For splats alone, Scaniverse is the easier and cheaper start.

LiDAR iPhones, non-LiDAR phones and Android

Both apps can use the LiDAR sensor on Apple's Pro devices. That means the iPhone 12 Pro and Pro Max and every Pro and Pro Max model since, plus iPad Pro models from 2020 onward. Standard iPhones, the Plus and mini models do not have LiDAR.

LiDAR's practical range is only a few meters. It helps with room scans and gives quick, roughly to-scale meshes, but it adds little for distant objects or large outdoor areas.

Without LiDAR, both apps fall back to photo-based capture. You walk around the subject taking photos or video, and the software reconstructs it. This works well for objects and splats, but it is slower and depends more on lighting and steady movement.

Android

Both apps are on Android, but Android phones do not have LiDAR, so you are always using photo capture. We could not confirm the device requirements for either app on Android, or whether Scaniverse's on-device splat processing works the same way there. If you are on Android, install both free versions and run one test scan before paying for anything.

Polycam also has a web app and an Apple Vision Pro app. Scaniverse has iOS, Android and web.

Scanning an object, a room and an outdoor scene

Here is how each app fits the three most common jobs, based on what each plan unlocks.

A small object

Both apps handle tabletop objects well with photo capture. The difference is what you can do with the file afterwards.

  • For 3D printing: Polycam needs Basic for STL or OBJ. Scaniverse may give you a usable mesh for free.
  • For a photographic look: a splat from either app looks better than a mesh, and Scaniverse does it without a subscription.

A room

This is Polycam's strongest case. A LiDAR iPhone gives a fast room scan in either app, but Polycam Business adds 2D and 3D floor plans, measuring tools and virtual walkthroughs. Real estate agents, contractors and designers usually need exactly those outputs.

Scaniverse will capture the room as a mesh or splat with metric scale, which is fine for a visual record. It is not built around floor plans.

An outdoor scene

Neither app is designed for whole buildings or large sites from a phone. LiDAR's short range limits mesh scans, and big photo captures get unwieldy. Splats are the better fit outdoors, because they hold up well for gardens, facades and street corners.

Scaniverse's paid tiers accept 360-degree camera footage, which helps capture bigger spaces faster. For full sites, vendors push drones and desktop photogrammetry, and that is a different budget.

Commercial use and privacy

Scaniverse's commercial usage rights come with its paid tiers, according to the July comparison. If you scan for clients, assume you need Plus or Pro until Niantic Spatial's terms say otherwise. Check Polycam's terms as well before selling work made on the free plan.

On privacy, Scaniverse's on-device mode keeps raw scans on your phone. Cloud processing in either app means uploading images of your home or a client's property. Polycam Free shares only through public links, and Scaniverse's public map invites you to publish splats, so look closely at what you post and where.

Alternatives worth a look

If neither app fits, two others come up often in 3D scanning roundups:

  • KIRI Engine: a common pick for Android and free users, with unlimited scans and exports on its free tier.
  • RealityScan: free for individuals and for businesses earning under $1 million a year.

For more phone tools in this space, browse our Graphics & Design and Photo & Video categories, or our list of the 5 best utility apps for iPhone and Android.

Which should you choose?

The Polycam vs Scaniverse decision comes down to what you need to export and whether you are paid for the work.

  • Hobbyists and curious beginners: Scaniverse. On-device scanning and splats cost nothing to try, and the files are easy to share.
  • Splat makers and 3D artists: Scaniverse for quick, compact splats. Polycam if your splats end up in Unity or Unreal.
  • 3D printing: Polycam Basic for dependable STL and OBJ exports, unless Scaniverse's free exports already cover your file.
  • Real estate, architecture and contractors: Polycam Business for floor plans, measurements and point clouds.
  • Android users: try both free tiers, then look at KIRI Engine if neither gives you the exports you need.
  • Large outdoor sites: neither on its own. A Scaniverse paid tier with a 360 camera is a start, but big sites need drone or desktop tools.

Frequently asked questions

Is Scaniverse still free in 2026?

Its on-device Classic mode is described as free, but Niantic Spatial added paid Plus and Pro tiers after the April 2026 relaunch. One source also reports a 20,000 monthly credit cap on the free plan, so check the limits in the app before starting a big project.

Can I export an STL for 3D printing without paying?

Not from Polycam: its free plan exports GLTF only, and STL needs Basic or higher. Scaniverse's free plan is still described as including exports, so it may cover simple printing jobs, but confirm the format list after the relaunch.

Which app is more accurate for measuring a room or drawing a floor plan?

Polycam is the one built for this, but floor plans and advanced measuring tools need its Business plan. Both apps capture rooms faster and closer to scale on an iPhone or iPad Pro with LiDAR.

Do I need a LiDAR iPhone to use Polycam or Scaniverse?

No. Both apps work on phones without LiDAR by reconstructing scans from photos or video. LiDAR mainly speeds up room scans and helps with scale, and its range is only a few meters.

Can either app scan a whole building or outdoor area?

Not well from a phone alone, since both are tuned for objects and rooms. Splats handle facades and small outdoor scenes better than meshes, and Scaniverse's paid tiers accept 360-degree camera footage for larger spaces.

Apps in this article

Sources

  1. Polycam vs Scaniverse: Best 3D Scanning App 2026
  2. Best Photogrammetry Apps 2026: iPhone, Android & Free
  3. From Pokémon GO to physical AI: Niantic Spatial unveils its global 3D mapping platform
  4. Niantic Spatial Launches Scaniverse and VPS 2.0

Last updated Nov 20, 2026. Prices and features were checked at the time of writing.

Articles on AppsPicks are researched and drafted with AI from current sources, checked automatically before publishing, and corrected by our editor when something is wrong. Spotted a mistake? Email [email protected]. How we review

Read in: EspañolPortuguês (Brasil)DeutschРусский